Browse guidesZoom

Fix Zoom connection and attendance problems

Every message Bottega shows about Zoom, what causes it and how to fix it.

8 min read Updated 28 Sept 2026 For everyone
On this page8 sections
  1. 01When you save the credentials
  2. 02When Bottega can't connect to Zoom
  3. 03Red or grey lines in the test results
  4. 04Zoom messages on the Setup tab
  5. 05Attendance messages after a live
  6. 06Personal join link messages
  7. 07The live viewer count doesn't appear
  8. 08Many participants didn't match a registrant

Find the message you see in the tables below. When Bottega passes on an error from Zoom, Zoom's own words follow “Zoom said”.

BottegaSettingsZoom
What you seeWhyWhat to do
Paste the Account ID from the app's credentialsThe Account ID is empty or too short.Copy it from the App credentials page of your Zoom app.
Paste the Client IDThe Client ID is empty or too short.Copy it from the same page.
Letters, numbers, - and _ onlySomething other than the ID came along when you copied.Copy the value again and paste only the value.
Add the Client secret. / Paste the Client secretNo Client secret is saved yet.Paste the Client secret from App credentials.
That doesn't look like a Zoom client secretThe value is too short to be a Zoom client secret.Copy it again. Usually only part of it was copied.
Couldn't save. Only admins can connect Zoom.Your Bottega role can't change the Zoom settings.Ask an admin of this space to connect Zoom.
Couldn't store the client secret. / Couldn't store the webhook secret token.Bottega couldn't save the secret securely.Try again. If it keeps happening, contact the GOATEDX team.
Save to test the new credentials.You have unsaved changes, so Test connection is off.Press Save & test.
Add all three credentials to test.Account ID, Client ID or Client secret is missing.Fill in all three and save.

These appear in red under Test connection, and in the status box as “Zoom couldn't be reached with these credentials”. The badge changes to Needs attention.

What you seeWhyWhat to do
The Zoom app is switched off.The app was never activated, or someone deactivated it.Open the Activation page of your Zoom app and activate it. If Zoom won't let you, fill in the developer contact on the Information page first.
This isn't a Server-to-Server OAuth app.The credentials come from another type of Zoom app.Create a Server-to-Server OAuth app as described in Connect Zoom, and use its credentials.
Zoom doesn't recognise the Account ID.The Account ID is wrong. It's often a Zoom user ID pasted by mistake.Copy the Account ID from the app's App credentials page.
Zoom doesn't accept this Client ID and Client secret together.One of them is wrong, comes from another app, or the secret was replaced in Zoom.Check the app is activated, then copy both again. If the secret changed, paste the new one.
Zoom rejected these credentials.Zoom refused for another reason.Read the text after “Zoom said”, fix what it names, then test again.
Couldn't reach Zoom. Try again.Zoom didn't answer in time.Test again in a few minutes.
Add the Account ID, Client ID and Client secret first.One of the three isn't saved.Fill in all three and press Save & test.
What you seeWhyWhat to do
Add the … scope in the Zoom app (apps made before 2024 use …), then test again.The app doesn't have that scope.Add the scope it names on your Zoom app's Scopes page, then test again. If Zoom won't let you add it, your Zoom role lacks permission for that scope, so ask an account admin.
Create personal join links, in grey, with “Only needed if you switch on personal join links.”The optional write scope isn't on the app.Ignore it unless you use personal join links.
No Zoom link yet for Night 1, Night 2 …Those upcoming lives have no Zoom link in Bottega.Add the link on the webinar's Setup tab.
“…” needs Registration: Required with Automatically approve for personal join links.Personal join links are on, but the meeting doesn't require registration with automatic approval.Change the meeting in Zoom as described in Prepare a Zoom meeting for Bottega.
This Zoom account has no meeting with that ID. The link belongs to another account, or the meeting was deleted.The meeting isn't in the connected Zoom account.Schedule the meeting in the connected account and update the link, or connect the Zoom account that hosts it.
Zoom said: … on a meeting line, mentioning scopesThe app can't read that meeting.Add meeting:read:meeting:admin, or webinar:read:webinar:admin for a Zoom Webinar.
Zoom didn't answer.Zoom didn't respond in time.Test again.
Connected. Add user:read:user:admin to show the account email here.The connection works. Bottega can't show the account email without that scope.Nothing. The scope is only for showing the email.
What you seeWhyWhat to do
This link has no meeting ID. Add it for automatic attendance.The link doesn't contain the meeting ID, as with some custom links.Type the meeting ID from Zoom into the box.
A Zoom ID has 9 to 12 digitsThe ID you typed isn't a Zoom meeting ID.Copy the ID from the meeting in Zoom. Spaces and dashes are fine.
Attendance will come from … , not the room in the link.The ID you typed differs from the one in the link.Fine if that's intended. Otherwise press Use the link's ID.

Each finished live has an attendance label on the webinar's Overview tab and on the run's cohort page. Click it for details and Sync now.

What you seeWhyWhat to do
Waiting for Zoom reportZoom hasn't published the participants report yet. Zoom says reports can take up to 30 minutes after a meeting ends, and sometimes they take longer.Wait. Bottega checks every 10 minutes from 30 minutes into the live until the report comes in, then again 6 and 24 hours after the planned end. You can also press Sync now.
This night hasn't ended yet.The live's planned end time hasn't passed.Wait, or correct the start time and duration on the Setup tab.
Add the Zoom meeting ID to this night first.The live has no Zoom link or ID.Add it on the Setup tab.
Zoom isn't connected for this space.Zoom isn't connected, or the last test failed.Go to Settings › Zoom and press Test connection.
Attendance was imported from a CSV; sync manually to replace it.Automatic syncs never overwrite a CSV import.Press Sync now if you want Zoom's report instead of the CSV.
A Zoom error ending in “Check the app's scopes …”Zoom refused the report.Add report:read:list_meeting_participants:admin (report:read:admin on older apps). For Zoom Webinars, add report:read:list_webinar_participants:admin.
Couldn't reach Zoom. We'll try again shortly. / Couldn't save the attendance. We'll try again shortly.A temporary problem.Bottega tries again after about 25 minutes. You can also press Sync now.
That date is no longer part of this webinar.The date was removed from the webinar.Nothing.

Still waiting after a day

Bottega looks for the meeting from three hours before the live's start to three hours after its planned end. If the meeting ran outside that window, was hosted in another Zoom account, or wasn't hosted by a paid user, there's no report to find. Check the date, time and link on the Setup tab, then press Sync now.

Automatic checks stop three days after a live. Sync now still works after that, and Zoom keeps reports for 15 months. You can also import the Participants CSV from Zoom instead.

If Home shows the live as on air (for example “Night 1 on air”) instead of In the room now, no join event has reached Bottega for this live. Check these in order.

  • Settings › Zoom says “Zoom validated the endpoint. The live viewer count is on.” If it shows a different message, see the validation messages in the live viewer count guide.
  • The subscription is still switched on in Zoom. Zoom disables it after six failed checks in a row.
  • The joined and left events are added for the type you host. Meeting events don't cover Zoom Webinars.
  • The app has meeting:read:participant:admin, or webinar:read:participant:admin for Zoom Webinars.
  • The meeting people are in is the one linked on this live's Setup tab.

The full setup is in Show the live viewer count.

Without personal join links, Bottega matches people by the email Zoom saw when they joined. That's often different from the email they registered with, or empty for people joining by phone. Personal join links match people exactly. For past lives, unmatched people still count as viewers and are listed on the cohort page.

Something here out of date? Tell us and we'll fix the guide.

Still stuck?

Ask a person, not a bot.

Tell us your space and the page you were on. A screenshot helps. Someone on the GOATEDX team reads every email and replies.

bottega@goatedx.com