Browse guidesWebinars

Give every registrant their own Zoom link

How personal join links work, why they make attendance exact, how to switch them on, and what happens when something goes wrong.

7 min read Updated 18 Sept 2026 For admins
On this page7 sections
  1. 01Why attendance becomes exact
  2. 02How it works
  3. 03Before you start
  4. 04Turn on personal join links
  5. 05What happens in each case
  6. 06Changing the Zoom meeting later
  7. 07Check that it works

Without personal links, everyone gets the same Zoom link and Bottega matches attendance by the email people use in Zoom. With personal links, Bottega registers each person with Zoom and emails them a link that belongs to them alone. Zoom then reports exactly which registrant joined.

People often register with one email and join Zoom another way. Someone registers as siti.rahman@gmail.com and joins from a phone called “Siti's iPhone” with no email, or signs in to Zoom with a work address. Email matching misses them. A personal link carries the registrant's identity with it, whatever name or email they use in Zoom.

Bottega matches each Zoom participant in this order.

OrderMatched byHow reliable
1The personal join link they usedExact
2The email Zoom saw, compared with the registered emailMisses people who use another email or none
3No matchCounted as a viewer and listed on the cohort page, but not in show-up
  1. Someone registers on your lander

    Bottega registers them with the Zoom meeting through your Zoom connection. Zoom returns a join link for that person only.

  2. Their emails carry that link

    The confirmation goes out after the link is created, so it already contains it. Every reminder uses it too.

  3. After each date, Bottega fetches attendance

    Zoom's report lists the registrant behind each personal link, and Bottega matches on that.

  • Zoom is connected in Settings › Zoom. See Connect Zoom.
  • Registration is required on the Zoom meeting, with automatic approval. See Turn on registration in Zoom.
  • Each date has a Zoom link with a meeting ID. The line under the link on the Setup tab shows it.
BottegaWebinarsyour webinarSetup
The switch only shows when Zoom is available in your space.
  1. Switch on Personal join links

    It is at the bottom of the Nights & Zoom card. The panel reminds you that the Zoom meeting needs registration required.

  2. Press Save

    From now on, everyone who registers gets their own link.

  3. Create links for people who registered earlier

    The panel shows how many registrants already have a link, such as “0 of 312 registrants have a personal link”. Click Create links for existing registrants. Bottega works through them in batches, and you can stop and start again. Save any other changes first, because the button is disabled while the page has unsaved changes.

The setting is per run. New runs start with it on whenever Zoom is connected in Settings › Zoom; switch it off on a run's Setup tab if you need to.

SituationWhat happens
Zoom isn't connectedNobody gets a personal link. Everyone gets the shared link. The switch shows “Connect Zoom first”.
Registration isn't required on the Zoom meetingZoom refuses each registration. People get the shared link. The batch button stops and shows Zoom's error.
Zoom is down when someone registersThey get the shared link in their confirmation. Every 15 minutes Bottega retries for runs with a date in the next 14 days, and later reminders carry the personal link.
All dates share one meetingEach person is registered once and the same personal link works for every date.
Each date is a different meetingEach person is registered for every meeting, and each date's email carries that date's link.
A date has already passedNo new links are made for it.
You change the Zoom meeting after links were madeLinks already made still point to the old meeting, and emails keep sending them. See below.
You switch personal links offEmails not yet sent use the shared link again.

Check that it worked

  • Register yourself on the lander. The join button in your confirmation opens a link different from the one on the Setup tab.
  • The Setup tab's count reads, for example, “312 of 312 registrants have a personal link”.
  • After the live, the date's data source reads “Zoom API · synced … · 98% matched by personal link” or similar.

Something here out of date? Tell us and we'll fix the guide.

Still stuck?

Ask a person, not a bot.

Tell us your space and the page you were on. A screenshot helps. Someone on the GOATEDX team reads every email and replies.

bottega@goatedx.com